INTRODUCE

• Sensitity : 4uV
• Power Supply : 12V DC
• Frequency Range : 315~433.9MHz

• Voltage : 5A 24V/ DC or 120V/AC
• Power Consumption : 10.6 mA/12V
• Control Type : on/off, momentary,continue

Introducing

This is multi-funtion data receiver,the receiving data send by RS233 to the computer,to provide the user for follow-up the complete set using.

Application

1. For small community district joint defence system

Cooperate with TWS-HS (0.5W) Transmitter, (900 meter as the crow flies), such as setting the transmitter on window or door in the district, when the residence out, after turn on the power,the presever system will get ready for order to start out, while the thief open the door or window, the presever system will turn on, through the transmitter send out the data . The data receiving base will through RS232 communicate with PC in the same time, and promptly inform the security company to attent, you can take the advantage of this product. They are wireless equitment, easy, construction and service.

2. For the monitor system (the mountain slops that is landslide easy )

Cooperate with TWS-HS (0.5W)Transmitter, in the mountains slops which are easy come about landslide, setting on transmitter complete with map, signal the location of transmitter, while the landslide occurred, promptly the transmitter will auto turning on transmitter, this time the data receiving base receive the data and send to computer at once, then complete with map, that will know which districk will going occure landslide. ( this is exclusive for clients )

3. For the bridge monitor

Cooperate with TWS-HS (0.5W)Transmitter, setting the transmitter on the joiner of bridge, while there are earthquake and other accidente, caused the bridge broken and gap, throuth the transmitter send out the data, hereat the data receiving base received the data and transfer to computer,inform the authourity for attent.(This is exclusive item for clients).

4. For auto remote controller
5. For auto hoist
Testing software application
RS232 serial communications using program
Program Application

This is specialize applicate for receive Wireless Serial Port Communicate data, according the special data format being data decode, the special data format as following :

byte	Byte1	Byte2	Byte3
meaning	Data ID		Data

When the softward receive the special data format, which will corresponding proceed with the data and separate show on the data ID and data, beside, this software will show on the receiving order and timer in the same time, such as transmitter ID 000A 10 : 10 m, and the ID 000A transmitter 10 : 12m again, this software will only show the newest transmitte ID 000A, and previous showing ID000A will be masked in the reality operate process, this software can setting the mean of ID with the user, and also the data can communicate the data from the ID indicate.

Program application step

• Hardware connection

The BB Call device using the serial line connect to one of serial
Port of computer, connect 12C DC, now the current LED of
Module will keeping blinking.

• program bootloader

Owing to this program using automatic tech programmer, so in the first operating must be register accommodative for the automatical article, the methed of communication as following :
*Apply the program constrict the Receiver rar to one of document file, as C : \ My Documents and get the test.exe, Mscomm32.ocx and This instruction.
*Unipolar Start/operate,input Order : Regsvr32 C : /My Documents/Mscomm32.ocx, and press Enter buttom,then the Automatic registed is ready.
*Bipolar "test exe" and program bootloader. P.S. It is no need to Register for the automatic programmer.The interface of program bootloader as :



• Other function

This program allow the user install for series port,as turn on the indicate series port for stop receiving data, as to the receiving data for proceeding data filing and save the previous data...

• Program operating demonstration

From the following receiving demonstrative program, due to the data of Receiving part are 0xe6, 0x07, 0x0f, so the receiving program show as following (the data of identical ID will be masked) :