Spec

• Frequency Range : 916.5 MHz
• Modulate Mode : FSK
• Circuit Shape : PLL
• Data Rate : 3K~100 Kbps
• Sensitivity : -112 dBm

• Channel Spacing : 200 KHz
• Supply Voltage : 2.7~ 5.5 V
• High Sensitivity Passive Design
• Simple To Apply with Low External Count

Application

• Designed for Short-Range Wireless Control and Data Communications
• Supports RF Data Transmission Rates Up to 200 Kbps
• 2.4 V, Low Current Operation plus Sleep Mode
• Stable, Easy to Use, Low External Parts Count

Description

• The RWS-F916MODULE receiver is ideal for short-range wireless control and data Application where robust operation, small size, low power consumption and low cost are required. The RWS-F916 MODULE All critical RF functions are contained in the MODULE, simplifying and speeding design-in. The RWS-F868 is sensitive and stable. A wide dynamic range log detector, in combination with digital RSSI and a compound data slicer, provide robust performance in the presence of on-channel interference or noise. FCC 15.249 and similar regulations. CAUTION : Electrostatic Sensitive Device. Observe precautions when handling. Notes :
  
  • OOK BER measured with no DS1 threshold (DS2 disabled), and data encoded for DC-balance with a run length limited to 4 bit periods.
  • ASK BER measured with a 25 mV DS1 threshold, DS2 threshold 6 dB below peak, and data encoded for DC-balance with a run length limited to 4 bit periods.
  • Sleep to receive recovery time is for the sleep period and signal level indicated, -40 to 60 C.Recovery time will increase at higher temperatures, for longer sleep intervals and lower signal levels.

RWS-F916 Part No

Part No	Description
RWS-F916	FM Receiver Module 916.5MHz(300MHz~1GHz)

I have a question: